This tire features a longwearing, specializedRubber tread compound, shaped into a multi-faceted symmetric tread design combined with on-road comfort, off-road traction andRugged looks. It improves wear in high-torque applications by using chip- and chunk-resistant tread compound while it guards the polyester cord body by preventing it from abrasion, cuts, scuffing and punctures due to its sidewallRubber compound with Goodyear’s Durawall Technology. It has a twin, high-tensile steel belts,Reinforced with spiral wrapped layer of next-generation DuPont Kevlar* cord to provide comfort and strength. This tire passed the industry’s severe snow serviceRequirements and is marked with the mountain/snowflake symbol, enables it to help in clearing snow and mud due to its open shoulder blocks and tractionRidges from the outboard circumferential grooves base. It also comes in Pro-Grade LoadRange E sizes for three-quarter and SUV, vans, one-ton pickup that tows or hauls heavy loads frequently. For half-ton vehicles, standard load sizes are also provided.
| Specs: | Value: | Description: |
|---|---|---|
| Sidewall | BSW |
This describes the sidewall appearance. Examples include Black Sidewall, White Sidewall, and White Letters.
|
| Load Index | 123 |
The load index (LI) is a 2 or 3 digit number that corrolates to the maximum amount of weight the tire can carry. For example, a tire with a load index of 87 indicates that the tire can carry a maximim load of 1,201 lbs. In the case of our example the 87 identifies the tires ability to carry a maximum of 1,201 lbs. So 4 tires will carry a maximum of 4,804 lbs.Refer to your vehicle owner’s manual for theRecommended minimim Load Index. It is notRecommended to install tires with a lower Load Index. By doing so, this could cause your tires to be overloaded thus potentially causing a blowout…. read more
|
| SpeedRating | R |
SpeedRatings (SR) are based on laboratory tests and indicates the maximum speed the tire can achieve. These tests are based on limited time trials. Higher speedRating tires typically will yield better handling capabilities, but may oftenResult in lower mileage.Refer to your vehicle owner’s manual for theRecommended minimum SpeedRating. It is notRecommended to install a tire with a lower speedRating as it could affect the handling of your vehicle. It is important to note that speedRatings only apply to tires that have not been damaged, altered, under-inflated or overloaded. Additionally, most tire manufacturers maintain that a tire that has been cut or punctured no longerRetains the tire manufacturer’s original speedRating, even after beingRepaired because the tire manufacturer can’t control the quality of theRepair…. read more
|
| PlyRating | E/10PR |
PlyRating isRelated to the max load capacity. This value can be defined with a letter or number. The higher the number/letter, the higher the load capacity.
|
| UTQG | Not Available |
To help consumers evaluate their tires, the U.S. National Highway Traffic Safety Administration (NHTSA) created the Uniform Tire Quality Grading System (UTQG). The UTQGRates tires areRated on their tread-wear, traction performance, and temperatureResistance. The grade for each of these can be found on the sidewall of your tire (except for winter tires and certain light truck tires).
|
| Max Single Load(lbs) | 3415 | The maximum load this tire will support.Remember to multiply this number by the number of tires installed on your vehicle to get the maximum carrying capacity. This number is directlyRelated to the Load Index. |
| Max Single Air Pressure(PSI) | 80 | The maximum air pressure this tire will support. This does notRepresent the amount of air pressure your tires should have at all times. Consult with your owner’s manual to determine the best air pressure you should use for your vehicle. |
| Tread Depth | 15.0 | The amount of tread on the tire. Once the tire is worn to 2/32nds, it is considered fully used and should beReplaced at that time. Most tires will have tire indicators in the grooves of the tire to help you determine when the tires are worn down to 2/32nds. |
| Tread Design | Nondirectional |
Nondirectional – most common, same tread pattern on inside & outside of the tire. Can beRotated to all four corners of vehicle.
Asymmetrical – tread pattern is different on the inside to the outside of the tire, and must be mounted properly. Can beRotated to all four corners of the vehicle. Directional tires -Roll in only one direction, must be mounted properly. Once mounted they mustRemain on the same side of the vehicle, and only beRotated front toRear…. read more |
| Rim WidthRange | 7.0-8.0 | The approved wheelRim widthRange this tire will support. |
| MeasuredRim Width | 7.5 | TheRecommended wheel width asRecommended by the tire manufacturer to get the best wear us performance for this tire. |
| Section Width | 10.5 | The measurement from sidewall to sidewall. |
| Tread Width | 7.7 | The measurement from one side of the tread to the other side of the tread. |
| Overall Diameter | 31.7 | The height of the tire when fully inflated. |
Reviews
There are no reviews yet.